3D DESIGN PROCESS ABOUT US TERMS TIMBERS CUSTOMER PAGE ADDRESS CONTACT PRODUCTION INFO	Teak Chairs Teak Benches Teak Tables Miscellaneous Teak Slat Range
	Standard and Hi-back teak folding chairs : HotWax’s teak folding chairs are one slat wider than normal and feature two machine cut dovetail slats. These slats are machined, in house, to exacting tolerances and run the full depth of the front and back seat rails, making for a very strong seat. The solid brass leg pivots are custom made, and the flush slats in the back and the redesigned top rail lend a more contemporary look. Standard Folding teak Chair ( CFS ) Material: Teak Grade A in teak oil finish W: 55 cm D: 50 cm H: 90 cm Folded: Loadability 0,04M3 Hi Back teak Folding Chair ( CHBF ) Material: Teak Grade A in teak oil finish W: 55 cm D: 50 cm H: 100 cm Folded: Loadability 0,04 M3 Miami and Kino teak folding side chairs and armchairs : HotWax’s Miami and kino teak chairs feature a wider slat in the seat and back, and a nautical square hole pattern respectively which serves to set them apart from the others on the market, but the best thing about this chair is the through, wedged mortise and tenon construction. All the tenons in this chair run all the way through the rail or the leg, and is wedged twice from the outside, flaring the tenon and locking it in place. This is a very strong chair indeed. Once again all brass is custom made and threadlocker used on all barrel bolts. Miami Teak Arm Chair ( CMA ) Material: Teak Grade A in teak oil finish W: 57 cm D: 60 cm H: 92 cm Folded: Loadability 0,08 M3 Miami Side Teak Chair ( CMS ) Material: Teak Grade A in teak oil finish W: 45 cm D: 60 cm H: 92 cm Folded: Loadability 0,08M3 Kino Folding Teak Arm Chair ( CKFA) Material: Teak Grade A in teak oil finish W: 57 cm D: 44 cm H: 92 cm Folded: Loadability 0,09 M3 Kino Folding TeakSide Chair ( CKFS ) Material: Teak Grade A in teak oil finish W: 45 cm D: 44 cm H: 92 cm Folded: Loadability 0,07 M3 Dorset teak chair : HotWax’s teak Dorset chair is a particularly comfortable model with lumbar support curve and comfortable oval slats. It has a five postion recliner back and high quality brass barrel bolts, brackets and positioners used throughout. Threadlocker is applied to all barrel bolts on this chair Dorset Teak Chair ( CDO ) Material: Teak Grade A in teak oil finish W: 65 cm D: 75 cm H: 106 cm Folded: Loadability 0,15M3 Garden teak chair : HotWax’s teak garden chair range feature 55x55mm legs throughout and have a redesigned seat and back. The back slats are flush with the top rail, removing the uncomfortable ridge common with other designs, and have a smooth curve, which, along with a concave seat make for a very comfortable seating position. If the chairs are required to be knockdown, all the non-preassembled mortise and tenon joints are precision cut by machine, making for easy assembly, and all dowell holes are predrilled and dowells supplied. Garden Teak Arm Chair ( CGA ) Material: Teak Grade A in teak oil finish W: 60 cm D: 60 cm H: 92 cm Knocked Down: Loadability 0,07 M3 Garden Teak Arm Chair 1 ( CGA01 ) Material: Teak Grade A in Super Fine Sanding W: 60 cm D: 60 cm H: 92 cm Knocked Down: Loadability 0,07M3 GardenTeak Side Chair ( CGS ) Material: Teak Grade A in teak oil finish W: 60 cm D: 47 cm H: 92 cm Knocked Down: Loadability 0,06 M3 Teak stacking chair : HotWax’s teak stacking chair looks similar to other company’s models but once again it is the construction methods that set it apart. The arms are housed into the legs providing much greater resistance to racking than if they were simply glued to the outside of the legs, and of course, they have screws as well. All the slats are housed in individual mortises, instead of in slots, which are weak and can fill with water causing premature deterioration. The crucial underseat rails use twin tenons front and back, and all the other mortise and tenon joints are pinned with dowels. Teak Stacking Chair ( CS ) Material: Teak Grade A in Super Fine Sanding W: 55 cm D: 60 cm H: 90 cm Loadability: 0,15 M3 Harrington Teak Arm Chair ( CHA ) Material: Teak Grade A in teak oil finish W: 64 cm D: 57 cm H: 96 cm Loadability: 0,23 M3 Harington Teak Side Chair ( CHS ) Material: Teak Grade A in teak oil finish W: 47 cm D: 57 cm H: 96 cm Loadability: 0,18 M3 Buffalo teak chair : The HotWax Buffalo teak chair is of a more traditional design and features a through, wedged mortise and tenon joint between the side rail and the back leg for extra strength. Buffalo Teak Arm Chair ( CBUA ) Material: Teak Grade A in teak oil finish W: 57 cm D: 54 cm H: 88 cm Loadability: 0,20 M3 Buffalo Teak Side Chair ( CBUS ) Material: Teak Grade A in teak oil finish W: 53 cm D: 54 cm H: 88 cm Loadability: 0,15 M3 Peanut teak Chair : This model of the well known Peanut or Banana teak chair has a comfortable rake on the back and features an extra large 12cm wide back rail. Peanut Teak Chair ( CP ) Material: Teak Grade A in Super Fine Sanding W: 84 cm D: 65 cm H: 89 cm Loadability: 0,23 M3 Folding Muskoka (Adirondack) teak chair: HotWax’s folding Muskoka teak chair features solid glued and screwed constuction throughout, making for a strong chair, but the real advantage is in the loadability. A chair that in the traditional fixed version costs a fortune in shipping costs, folds up into a container friendly unit, which becomes a solid comfortable chair again when unfolded. Also good for the space conscious backyard or patio user. Muskoka Teak Chair ( CM ) Material: Teak Grade A in Teak Oil Finish W: 81 cm D: 92 cm H: 97 cm Folded: Loadability 0,26 M3 Muskoka Teak Chair With Calico Cushion ( CM )